pushbutton switches grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.gr ayhill.com snap action miniature pushbutton switches n.c. c. n.o. a b c d .312 .005 (7,92 0,13) keyway .068 (1,72) wide 15/32-32 uns-2a thread hex mounting nuts (2) .094 .010 (2,39 0,25) thick .562 .010 (14,27 0,25) across flats .95 (24,13) max. over pin heads .880 .010 dia. (22,35 0,25) 1.966 (49,94) ref. a = .273 .020 (6,93 0,51) b = .454 .015 (11,53 0,38) c = .796 .015 (20,22 0,38) d = .443 .015 (11,25 0,38) label* *part number and e.i.a. date code label dimensions in inches (and millimeters) spdt solder lug terminal 07-26* spstCfaston terminals 07-21 07-22 all dimensions not shown are same as part no. 7-26. all dimensions not shown are same as part no. 7-26. circuitry series 07 series 2000 spst and spdt, 10 amp features ? momentary contact ? extremely fast make-and-break ? audible click specifications rating criteria rated: to make and break 10 amps at 115 vac, or 5 amps at 220 vac resistive load for 25,000 operations contact resistance: 25 milliohms or less on a new switch voltage breakdown: 1,000 vac between mutually insulated parts insulation resistance: 1,000 megohms minimum operating features total button travel: .065 (1,65) approximately overtravel: .008 (0,20) approximately actuating force: 24 ounces approximately mounting hole: 31/64" (12,30) inches terminal type: solder lug/faston operating temperature: -40c to +85c available from your local grayhill distributor. for prices and discounts, contact a local sales office, an authorized local distributor or grayhill. materials and finishes housing, button and internal bridge: thermoset plastic mounting nuts, bushings, and internal bracket: brass, tin zinc fixed and moving contacts: fine silver internal spring, link and contact carrier: beryllium, copper cover-to-base mounting pins: brass faston terminals: brass, tin over nickel solder lug terminals: brass, zinc trivalent chromate-plated 2201 2202 07-7 07-8 spstCsolder lug terminals .380 .015 (9,65 0,38) 1.903 (48,34) ref. label* *part number and e.i.a. date code label .387 .015 (9,83 0,38) 1.910 (48,51) ref. terminals to accommodate 1/4 inch push-on termination label* *part number and e.i.a. date code label spst n.o. spst n.c. spdt - bbm n.c. n.o. c. accessories button cap part no. 07z1047 button guard part no. 10c1015-1 decorative mounting nut part no. 07c1040-1 ordering information *part description number circuitry button terminal 2201 spstCn.o. red solder 07-7 spstCn.o. black solder 07-21 spstCn.o. red faston 2202 spstCn.c. black solder 07-8 spstCn.c. red solder 07-22 spstCn.c. black faston 07-26 red spdtCbbm red solder 07-26 blk spdtCbbm black solder part accessory number description 07z1047-1 blk black button cap 07z1047-2 red red button cap 07c1040-1 decorative nut 10c1015-1 button guard ? 25,000 cycles of operation pushbutton 59
|